Acura 2016 RDX Online Reference Owner'S Manual Download Page 331

Page: 331 / 445

Parking Your Vehicle

Parking Sensor System

330

Driving

Make sure that the parking sensor system is not activated. Set the power mode to
VEHICLE OFF (LOCK).

Press and hold the parking sensor system button, and set the power mode to ON.

Keep pressing the button for 10 seconds. Release the button when the indicator
in the button flashes.

Press the button again. The indicator in the button goes off.

The beeper sounds twice. The rear sensors are now turned off.

To turn the rear sensors on again, follow the above procedure. The beeper sounds
three times when the rear sensors come back on.

■

Turning off All Rear Sensors

Turning off All Rear Sensors

When you shift to

(

, the indicator in the parking

sensor system button blinks as a reminder that the
rear sensors have been turned off.

Summary of Contents for 2016 RDX






























































































































































































































































































































































































































































Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands

Acura 2016 RDX, Online Reference Owner'S Manual

Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands