Acura 2016 RDX Online Reference Owner'S Manual Download Page 315

Page: 315 / 445

314

Driving

Braking

Brake System

Use the parking brake to keep the vehicle stationary when parking.

To apply:

Depress the parking brake pedal down with
your foot.

To release:
1.

Depress the brake pedal.

Depress the parking brake.

■

Parking Brake

Parking Brake

NOTICE

Release the parking brake fully before driving. The
rear brakes and axle can be damaged if you drive
with the parking brake applied.

If you start driving without fully releasing the parking
brake, a buzzer sounds as a warning, and

RELEASE

PARKING BRAKE

Release Parking Brake

appears

on the multi-information display.

Always apply the parking brake when parking.

Summary of Contents for 2016 RDX






























































































































































































































































































































































































































































Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands

Acura 2016 RDX, Online Reference Owner'S Manual

Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands