Acura 2016 RDX Online Reference Owner'S Manual Download Page 400

Page: 400 / 445

Continued

399

If a Tire Goes Flat

Temporarily Repairing a Flat Tire

Han

lin
g the U

expected

Remove the valve cap from the tire valve
stem.

Remove the sealant/air hose from the
packaging.

Attach the sealant/air hose onto the tire
valve stem. Screw it until it is tight.

■

Injecting Sealant and Air

Injecting Sealant and Air

In cold temperatures, the sealant may not flow easily.
In this situation, warm it up for five minutes before
using.

The sealant can permanently stain clothing and other
materials. Be careful during handling and wipe away
any spills immediately.

WARNING

Tire sealant contains substances that are
harmful and can be fatal if swallowed.

If accidentally swallowed, do not induce
vomiting. Drink plenty of water and get
medical attention immediately.

For skin or eye contact, flush with cool
water and get medical attention if
necessary.

Valve Stem

Valve Cap

Sealant/Air Hose

Valve Stem

Sealant/Air Hose

Summary of Contents for 2016 RDX






























































































































































































































































































































































































































































Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands

Acura 2016 RDX, Online Reference Owner'S Manual

Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands