Acura 2016 RDX Online Reference Owner'S Manual Download Page 21

Page: 21 / 445

Quick

Referenc

e Guide

What to Do If

The power mode does not
change from VEHICLE OFF
(LOCK) to ACCESSORY.
Why?

●

The steering wheel may be locked.

●

Move the steering wheel left and right
after pressing the

ENGINE START/STOP

button.

The power mode does not
change from ACCESSORY
to VEHICLE OFF (LOCK).
Why?

The shift lever should be moved to

(

Why does the brake pedal
pulsate slightly when
applying the brakes?

This can occur when the ABS activates, and does not indicate a
problem. Apply firm, steady pressure on the brake pedal. Never
pump the brake pedal.

Summary of Contents for 2016 RDX






























































































































































































































































































































































































































































Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands

Acura 2016 RDX, Online Reference Owner'S Manual

Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands