Acura 2016 RDX Online Reference Owner'S Manual Download Page 220

Page: 220 / 445

219

General Information on the Audio System

Recommended CDs

Continued

Features

Recommended CDs

•

Use only high-quality CD-R or CD-RW discs labeled for audio use.

•

Use only CD-R or CD-RW discs on which the recordings are closed.

•

Play only standard round-shaped CDs.

•

Some software files may not allow for audio play or text data display.

•

Some versions of MP3, WMA or AAC formats may be unsupported.

Recommended CDs

A Dual-disc cannot play on this audio unit. If recorded
under certain conditions, a CD-R or CD-RW may not
play either.

■

CDs with MP3, WMA or AAC files

The CD packages or jackets should have one of these marks.

Summary of Contents for 2016 RDX






























































































































































































































































































































































































































































Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands

Acura 2016 RDX, Online Reference Owner'S Manual

Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands