Acura 2016 RDX Online Reference Owner'S Manual Download Page 365

Page: 365 / 445

364

Replacing Light Bulbs

Back-Up Light and Taillight Bulbs

Main

tenan

Back-Up Light and Taillight Bulbs

When replacing, use the following bulbs.

Remove the cover by prying on the edge
using a flat-tip screwdriver.

Wrap the flat-tip screwdriver with a cloth
to prevent scratches.

Turn the socket to the left and remove it.
Remove the old bulb.

Insert a new bulb.

Back-Up Light: 16W
Taillight: LED type

Back-Up Light and Taillight Bulbs

Taillight bulbs are LED type. Have an authorized
Acura dealer inspect and replace the light assembly.

Bulb

Socket

Summary of Contents for 2016 RDX






























































































































































































































































































































































































































































Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands

Acura 2016 RDX, Online Reference Owner'S Manual

Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands