Acura 2016 RDX Online Reference Owner'S Manual Download Page 18

Page: 18 / 445

Quick

Referenc

e Guide

VSA

OFF Button

(P 306)

●

The vehicle stability assist (VSA

) system

helps stabilize the vehicle during
cornering, and helps maintain traction
while accelerating on loose or slippery
road surfaces.

●

VSA

comes on automatically every time

you start the engine.

●

To turn VSA

on or off, press and hold

the button until you hear a beep.

Cruise Control

(P 279)

●

Cruise control allows you to maintain a
set speed without keeping your foot on
the accelerator pedal.

●

To use cruise control, press the

CRUISE

button, then press

DECEL/SET

once you

have achieved the desired speed (above
25 mph or 40 km/h).

Tire Pressure Monitoring
System (TPMS)

(P 310)

●

TPMS monitors tire pressure.

●

TPMS is turned on automatically every
time you start the engine.

Refueling

(P 335)

Pull the fuel fill door
release handle.

Turn the fuel fill cap
slowly to remove the
cap.

Place the cap in the
holder on the fuel fill
door.

After refueling, screw
the cap back on until it
clicks at least once.

Fuel recommendation: Unleaded premium gasoline with a pump octane

number 91 or higher recommended

Fuel tank capacity: 16 US gal (60.5 L)

Not available on all models

Summary of Contents for 2016 RDX






























































































































































































































































































































































































































































Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands

Acura 2016 RDX, Online Reference Owner'S Manual

Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands