Acura 2016 RDX Online Reference Owner'S Manual Download Page 367

Page: 367 / 445

366

Main

tenan

Checking and Maintaining Wiper Blades

Checking Wiper Blades

If the wiper blade rubber has deteriorated, it will leave streaks and the hard surfaces
of the blade may scratch the window glass.

Changing the Front Wiper Blade Rubber

Lift the driver side wiper arm first, then the
passenger side.

Place a cloth on the edge of the lock tab.
Push the lock tab up with a flat-tip screw
driver.

Slide the blade from the wiper arm.

Changing the Front Wiper Blade Rubber

NOTICE

Avoid dropping the wiper arm; it may damage the
windshield.

Lock Tab

Summary of Contents for 2016 RDX






























































































































































































































































































































































































































































Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands

Acura 2016 RDX, Online Reference Owner'S Manual

Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands