Acura 2016 RDX Online Reference Owner'S Manual Download Page 119

Page: 119 / 445

118

Co
ntrols

Setting the Clock

Clock

You can adjust the time in the clock display with the power mode in ON.

■

Using the SETUP button

Press the

SETUP

button.

Rotate

to select

Adjust Clock

, then press

Rotate

to select the item you want to

change (12/24 hour mode, hour, minute).
Then press

Rotate

to make the adjustment.

Press

to enter your selection. The display

returns to

Adjust Clock

. Repeat steps 3 to

5 to adjust other items.

To enter the selection, Rotate

and select

Set

, then press

Press the

SETUP

button to go back to the

normal display.

Clock

These indications are used to show how to operate
the selector knob.
Rotate

select.

Press

to enter.

To set the time to the nearest hour:
Press and hold the

CLOCK

button until

Adjust Clock

appears, then press the

(

(Reset) button.

Depending on the displayed time, the clock sets
forward or backward.
Example:
1:06 will reset to 1:00
1:53 will reset to 2:00

The clock is automatically updated through the
navigation system, so the time does not need to be
adjusted.

Models with navigation system

Summary of Contents for 2016 RDX






























































































































































































































































































































































































































































Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands

Acura 2016 RDX, Online Reference Owner'S Manual

Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands