Acura 2016 RDX Online Reference Owner'S Manual Download Page 79

Page: 79 / 445

Indicators

strum

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Lane Departure
Warning (LDW)
Indicator

●

Comes on for a few seconds when
you change the power mode to ON,
then goes off.

●

Comes on if there is a problem with
the LDW system.

●

Stays on constantly

- Have your vehicle

checked by a dealer.

●

Comes on when the LDW system
shuts itself off.

●

Stays on

- The temperature inside the

camera is too high.
Use the climate control system to cool down
the camera.
The system activates when the temperature
inside the camera cools down.

Front Sensor Camera

P. 282

●

Stays on

- The area around the camera is

blocked by dirt, mud, etc. Stop your vehicle
in a safe place, and wipe it off with a soft
cloth.

●

Have your vehicle checked by a dealer if the
indicator and message come back on after
you cleaned the area around the camera.

Front Sensor Camera

P. 282

Models with LDW

* Not available on all models

Summary of Contents for 2016 RDX






























































































































































































































































































































































































































































Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands

Acura 2016 RDX, Online Reference Owner'S Manual

Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands