Network Functionality
© 2018 ACTIA I+ME GmbH │ Ref. IR:14938
40
/
92
[HDDSSTATE]
HDDsList=1,2,3
HDDsActive=1,2
The [Operator] web server menu allows access to the hard drives. Big files should not
be clicked or saved because a device crush may occur due to the intermediate RAM
check.
11.5.3
Automatic FTP Upload
Passenger log data, log data and alarm recording can be automatically uploaded to
an FTP server. The FTP server must be check before that. Parametrization is
performed under menu item [Configuration” - “Network].
The APC/APS files in Dilax or FAN format can be saved to a directory on the FTP
server or they can be dumped. The directory is determined by "DLX data FTP subdir".
11.5.4
FTP Upload via Batch Files
An FTP upload of the recorded data to the FTP server can be initiated by batch files,
“FTP basepath request” parameter.
11.5.5
UPD Broadcast - Inter-Device Communication
To communicate over the local network, the devices send and receive “UDP datagram
broadcast” packages using Port 30603.
The first byte is always the package identifier 0..255, followed by a string with 0
termination.
The string always starts with an additional keyword, ending with the 0 termination or
an additional line break ‘\n’. All unexpected packages must be ignored without an
error message. The maximum length is defined by the maximum length of the “UDP
datagram broadcast” packages.
The most important packages:
##----------------------------------------------
##--"ALARM" rx + tx:
