Actia BOP xD User Manual Download Page 23

Page: 23 / 92

Mounting and Installation

7.2.2

Installation without BOP XD system rack

There are four boreholes at the bottom with a diameter of 6 mm.

Bore holes as per the boring diagram

Secure the

BOP xD

with 4 M6 screws

Use clamping rings or toothed lock washers to secure the screws.

Tighten the screws by hand

7.2.3

Installation with system racks

On the back of the

BOP xD

there are insertion slots for the mounting rack flaps.

Secure the system rack as per the Installation Instructions.

Consider the mounting rack used

Push the

BOP

with its back first in the mounting rack

Bend the front side at 25-30° so that the insertion flaps fit into the insertion slots

Press

BOP

slightly downward

BOP

must be horizontal

Secure

BOP

with 2 M6 screws to the mounting rack

WARNING - Physical injuries

Mounting the device



Mount the

BOP xD

properly, so that it

cannot fall down.



Before departure, check whether the

BOP

is firmly fixed.

Should the BOP xD fall during an accident because it
hasn’t been properly fixed and if it causes physical inju-
ries, consult a physician immediately

Summary of Contents for BOP xD





























































































Search results

Summary of Contents for BOP xD

Reviews:

Related manuals for BOP xD

Brands by name

Popular brands

Actia BOP xD, User Manual

Search results

Summary of Contents for BOP xD

Reviews:

Related manuals for BOP xD

Brands by name

Popular brands