Acer ARMC User Manual Download Page 46 | Manualshive

Page: 46 / 173

background image

Acer Remote Management Card (ARMC) User’s Guide

36

Section Icons and Functions,

Continued

This table allows you to become familiar with the many icons used in the GUI.

Section

Icon

Name

Description

System
Information

This page contains general information describing the ARMC
card's firmware and the host system.

ARMC
Health
Information

This page contains the monitored voltages on the ARMC
card. These voltages are measured both at the PCI bus
directly, and on-board the ARMC card itself.

Host Health

This page describes the environmental parameters for the
host system based on information from an SDK file. These
parameters include, but are not limited to, ambient/
component temperatures, voltages, fan speeds, and other
chassis parameters.

Information

Event Log

This page contains the log of events that have occurred in the
host system. These events are generated due to environmental
circumstances as well as other parameters monitored
periodically by the ARMC hardware.

Remote Control

This page allows you to control the host system through a
hardware reset or power cycle.

Remote Console

This page allows you to remotely operate the host system’s
keyboard and mouse during a video redirection.

Management

Crash Screen

This page allows you to view the last screen before a cold
boot. This is useful in the event that the host system locks up
or freezes.

Cont’d

«
...
44
45
46
47
48
...
»

Summary of Contents for ARMC














































































































































































Reviews:

No comments

Related manuals for ARMC

Brand: Rane Pages: 4

Brand: RadiSys Pages: 44

Brand: EVS Pages: 30

Brand: SIIG Pages: 6

Brand: DigiTech Pages: 6

Developer's Board

Brand: Sony Ericsson Pages: 28

Brand: ExtraHop Pages: 2

Brand: Commell Pages: 18

Brand: Paradyne Pages: 28

Brand: Dataprobe Pages: 72

GigaVUE H Series

Brand: Gigamon Pages: 55

Brand: Jatontec Pages: 13

Brand: NetApp Pages: 10

Brand: RTI Pages: 4

Brand: StarTech.com Pages: 16

Brand: AvaLAN Pages: 13

Brand: AMX Pages: 1

Brand: Hamilton/Buhl Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands