Acer ARMC User Manual Download

Page: 92 / 173

Acer Remote Management Card (ARMC) User’s Guide

ARMC Card Configurations,

Continued

Administrator Setup

The

Administrators

screen is a subsection of the

Configuration

group. This page allows

you to configure the administrators who have access to the ARMC card. The following
table describes the information listed in this subsection in detail:

Item

Description

Select Administrator

This box contains a list of all administrators who are able to access
this ARMC card.

Note:

The default administrator is

acerarmc

. It is prudent for

you to create a new administrator and remove the default
administrator.

Note:

The

Select Administrator

box can display up to 16

administrators.

Add Button

This button allows you to enter a page that allows you to add and
configure new administrators to your ARMC card.

Edit Button

This button allows you to enter a page that allows you to edit a
current administrator’s account information

Remove Button

This button allows you to eliminate an administrator from your
ARMC card’s access list.

Cont’d

Summary of Contents for ARMC














































































































































































Search results

Summary of Contents for ARMC

Reviews:

Related manuals for ARMC

Brands by name

Popular brands

Acer ARMC, User Manual

Search results

Summary of Contents for ARMC

Reviews:

Related manuals for ARMC

Brands by name

Popular brands