manualshive.com logo in svg

Acer ARMC, User Manual

Share
Download
Acer ARMC User Manual Download Page 113

Chapter Four : Using Your ARMC Card

103

Advanced ARMC Card Configurations, 

Continued

IPMI Configuration, Continued

The following table describes the information listed in this subsection in detail:

Item

Description

Host System has
BMC

This check box allows you to enable the use of the host system’s
BMC chip with the ARMC card.

Host System BMC
I2C Address

This field allows you to change the ARMC card’s BMC I2C address
so that it does not conflict with the host system or the I2C’s slave
address.

U

se IPMI to Control

System Power

This check box allows you to control the host system’s power on and
power off functions through the BMC chip.

Use BMC's SDR for
Sensor Information

This check box allows you to monitor the host system’s health
through the BMC’s Sensor Data Record (SDR).

ARMC Maintains
Private System Health
Event Log

This check box allows the ARMC card to store all the host system’s
event logs.

Save Button

This button allows you to save your configuration.

Modem Configuration

The 

Modem Configuration 

screen is a subsection of the 

Advanced 

group. This page

describes the

 Modem Configuration 

parameters for the ARMC card.

 

Summary of Contents for ARMC














































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands