Acer ARMC User Manual Download Page 126

Page: 126 / 173

Acer Remote Management Card (ARMC) User’s Guide

116

RMConfigApp,

Continued

Server Information Tab

The

Server Information

tab allows you to enter a description for the host system. This

information can be viewed from the

System Information

page via a web browser. This

information is also attached to alerts. This helps you identify the ARMC’s host system
and the host system’s physical location.

The

Server Information

fields are explained below:

Field/ Button

Description

Server Name

The

Server Name

field allows you to specify a name for the host system.

Server Location

The

Server Location

field allows you to specify the physical location of the host system.

Server OS

The

Server OS

field allows you to specify the operating system loaded on the host system.

Server Description

The

Server Description

field allows you to describe the host system.

Apply Button

The

Apply

button allows you to make the settings active on the ARMC Card.

Summary of Contents for ARMC














































































































































































Search results

Summary of Contents for ARMC

Reviews:

Brands by name

Popular brands

Acer ARMC, User Manual

Search results

Summary of Contents for ARMC

Reviews:

Brands by name

Popular brands