Acer ARMC, User Manual

Page: 67 / 173

Chapter Four : Using Your ARMC Card
57
ARMC Card Management
You can left click on the Management section button to remotely control and redirect
your ARMC card and host system. This is the most powerful feature of the ARMC card.
These functions are divided into two subsections. The following table gives you a brief
description of each. Each subsection is explained in more detail further in this section.
Function Icon Description
Remote
Control This page allows you to control the host system through a hardware
reset or power cycle.
Remote
Console This page allows you to remotely operate the host system’s
keyboard and mouse during a video redirection.
Crash Screen This page allows you to view the last screen before a cold boot.
This is useful in the event that the host system locks up or freezes.
Remote Control
The Remote Control screen is a subsection of the Management group. The buttons in this
subsection generate the following results:
Button Description
Reset Generates a hardware reset signal on the host system.
Power Down Powers up the host system.
Power Up Powers up the host system.
Power Cycle Automatically generates power down followed by a power up
sequence with a pre-specified delay.
Reset ARMC Resets the ARMC card's on-board firmware.
Note:
Sometimes resetting the host system cannot solve your given problem. In such cases,
power cycling the host system may overcome the problem.