Acer ARMC User Manual Download Page 169

Page: 169 / 173

Appendix L : GtkRConsoleARMC for Linux

159

Appendix L

GtkRConsoleARMC for Linux

Installation

If you are using a Linux client system to connect to the ARMC card, you can run the

gtkRConsoleARMC

utility to remotely control the ARMC card and redirect the host

system’s keyboard, video, and mouse.

Note:

The

gtkRConsoleARMC

utility must be installed on the remote client system, not the host

system.

Use the following command to run

gtkRConsoleARMC

rpm -Uvh gtkRConsole-1.3-1.i386.rpm

You can also double left click the RPM file located on the

ARMC CD

if you are using X

windows.

The file is located in the following directory on the

ARMC CD

CDROM\RemoteTools\Linux\gtkRConsoleRPM-ACER\

The name of the RPM is as follows:

gtkRConsoleARMC-1.3-1.i386.rpm

Summary of Contents for ARMC














































































































































































Search results

Summary of Contents for ARMC

Reviews:

Related manuals for ARMC

Brands by name

Popular brands

Acer ARMC, User Manual

Search results

Summary of Contents for ARMC

Reviews:

Related manuals for ARMC

Brands by name

Popular brands