Acer ARMC User Manual Download Page 80

Page: 80 / 173

Acer Remote Management Card (ARMC) User’s Guide

Redirection,

Continued

Setting up Virtual Floppy on Windows 2000/XP

Windows 2000/XP needs to install the

amivirtfl.inf

file before you can redirect the

floppy drive on the host system. Windows asks for the INF file when you attempt to
redirect the floppy drive using the remote console for the first time.

Step

Description

When you first attempt to redirect the floppy drive, Windows 2000/XP detects a new device called

AMI

Virtual Floppy

. Windows 2000/XP asks you to provide the software drivers for the newly discovered

device. Do not use the default file provided by Windows 2000/XP. Instead, select the

Specify a Location

option.

Note:

Do not use the

amivirtfl.inf

when prompted to install the virtual CD-ROM drivers. The

Virtual CD-ROM device does not require any special drivers. You can select the default option Microsoft
Windows provides.

Left click the

Don’t search I will choose the driver to install

option and left click the

Next

button.

Cont’d

Summary of Contents for ARMC














































































































































































Search results

Summary of Contents for ARMC

Reviews:

Brands by name

Popular brands

Acer ARMC, User Manual

Search results

Summary of Contents for ARMC

Reviews:

Brands by name

Popular brands