Acer ARMC User Manual Download Page 50

Page: 50 / 173

Acer Remote Management Card (ARMC) User’s Guide

System Information

The

System

Information

screen is a subsection of the

Information

group. The following

table describes the information listed in this subsection in detail:

Field

Description

Version Information

This field gives the ARMC card’s firmware version number.

Build Date

This field gives the ARMC card’s build date. It is in the following
format:

DAY MONTH DATE HOUR:MIN:SEC TIMEZONE YEAR

Host Name

This field displays the name of the host system.

Host Hardware

This field displays the type of hardware used for the host system.

Host Location

This field displays the location of the host system.

Description

This field displays a description of the host system.

ARMC card’s Name

This field gives you the ARMC card’s current name.

Note:

The default name is “ARMC

- <the ARMC card’s

MAC address>

”

Summary of Contents for ARMC














































































































































































Search results

Summary of Contents for ARMC

Reviews:

Related manuals for ARMC

Brands by name

Popular brands

Acer ARMC, User Manual

Search results

Summary of Contents for ARMC

Reviews:

Related manuals for ARMC

Brands by name

Popular brands