Acer Remote Management Card (ARMC) User’s Guide
126
ARMC Card Flash Utility,
Continued
Step
Description
1
Left click the
Card Settings
button to begin.
The
Active Cards in Recovery Mode
screen appears and starts to search for ARMC cards in
Recovery
Mode
.
Left click the ARMC card’s MAC address that you want to configure.
The
Active Cards in Recovery Mode
buttons are explained in the table below:
Button
Description
Stop
The
Stop
button allows you to stop searching the network for active cards in
Recovery
Mode
.
Refresh
The
Refresh
button allows you to start searching the network again for ARMC cards’
MAC addresses in
Recovery Mode
.
Select
The
Select
button allows you to specify the highlighted ARMC card’s settings. You can
specify the ARMC card’s, IP, Network Mask, and Gateway addresses as shown in the
following step.
2
Cancel
The
Cancel
button allows you to cancel any new settings that are not saved.
Cont’d
Summary of Contents for ARMC
