Acer ARMC User Manual Download Page 41

Page: 41 / 173

Chapter Three : Locating Your ARMC Card

IP Address Range,

Continued

Note:

The Start and End IP addresses can be the same if you only wish to scan for one ARMC
card with that specific IP address.

When you have finished entering all the IP address ranges to be scanned, make sure that
they appear correctly in the list box. Confirm that the checkbox next to the IP range you
want to search is checked.

At this point, you have two options. You can choose to run the scan immediately by left
clicking on the

Next

button, or you can select to schedule the discovery to run at specific

times and intervals: daily, weekly, monthly or never.

The name and IP range of the ARMC card will display in the

Selected IP Range

window.

Left click on the

Next

button.

Cont’d

Summary of Contents for ARMC














































































































































































Search results

Summary of Contents for ARMC

Reviews:

Related manuals for ARMC

Brands by name

Popular brands

Acer ARMC, User Manual

Search results

Summary of Contents for ARMC

Reviews:

Related manuals for ARMC

Brands by name

Popular brands