Acer ARMC User Manual Download Page 167

Page: 167 / 173

Appendix K : Host System USB Mouse and Keyboard Considerations for Linux 7.x

157

Appendix K

Host System USB Mouse and
Keyboard Considerations for
Linux 7.x

Overview

This appendix describes how to set up the USB keyboard and mouse on the host system
running RedHat Linux 7.x so that they can be redirected.

Note:

For RedHat Linux 8.x, disregard these instructions.

File Description

This package contains two files as described below:

MOUSEC~1 RPM 118,299 11-28-01 16:43

mouseconfig-4.22-1.i386.rpm

README.PDF this

file

The first file can be downloaded from the following website:

http://www.redhat.com/support/errata/RHBA-2001-062.html

Check Your AMIBIOS Settings

Check your system BIOS to verify that the

OnBoard USB

and

Legacy USB

options are

Enabled

. If not, the USB devices cannot function.

USB Keyboard

You will be able to redirect the keyboard and use the keyboard on the host system at the
same time.

Note:

LILO is not USB aware. The system BIOS must have USB keyboard support. If not, you
cannot use the redirected keyboard to select a different boot image.

Summary of Contents for ARMC














































































































































































Search results

Summary of Contents for ARMC

Reviews:

Related manuals for ARMC

Brands by name

Popular brands

Acer ARMC, User Manual

Search results

Summary of Contents for ARMC

Reviews:

Related manuals for ARMC

Brands by name

Popular brands