115
To initialize the Onboard SATA RAID Configuration Utility:
Note:
There must be more than two SATA hard drives installed in
the system, otherwise the Intel Matrix Storage Manager option
ROM will be disabled.
1
Turn on the server and the monitor.
2
During POST, press
Ctrl
-
I
on the Intel Matrix Storage Manager
option ROM prompt.
To create a RAID 1 volume:
1
On the Onboard SATA RAID Configuration Utility, select
1. Create RAID Volume
under the Main Menu, then press
Enter
.
2
Specify a name for the new RAID volume, then press
Enter
.
3
Use the
Up
and
Down
arrow keys to select
RAID 1 (Mirror)
for
the RAID level, then press
Enter
.
4
Use the space bar to select the drives that you want to add into the
array, then press
Enter
.
This step is only applicable for systems with more than two hard
drives installed.
5
Press
Enter
to accept the RAID 1 volume capacity.
6
Press
Enter
, then
Y
to start creating the new RAID 1 volume.
Once the new RAID 1 volume is created, it’ll be listed under the
Disk/Volume Information.
7
Revert to the Main Menu and select
4. Exit the MAIN MENU
.
Proceed to the installation of the operating system. Refer to the
user documentation that came with your OS for related
instructions.
Summary of Contents for Altos G540 Series
