3 System upgrade
52
6
Store the old processor inside an anti-static bag.
7
Remove the new processor from its protective packaging.
8
Install the new processor.
(1) Hold the processor by its edges, then insert it in the socket.
Make sure that the alignment tabs on the socket fit the two
notch located on the edge of the processor. The pins are
keyed in such a way that you cannot install the processor in
the wrong orientation without bending the pins.
(2) Close the retention plate.
(3) Engage the load lever back into place.
9
Apply the thermal interface material.
(1) Use an alcohol pad to wipe off the old thermal grease from
both the HSF assembly and the processor socket retention
plate.
(2) Apply a thin layer of an Acer-approved thermal interface
material before installing the HSF.
Make sure that only a
very thin layer
is applied so that both
contact surfaces are still visible.
Summary of Contents for Altos G540 Series
