39
Opening the server
Caution:
Before you proceed, make sure that you have turned
off the system and all peripherals connected to it. Read the
“Pre-installation instructions” section on page 38.
You need to open the server before you can install upgrade
components. The front bezel and (left) side panel are removable to
allow access to the server’s internal components. Refer to the
following sections for instructions.
Removing the side panel
1
Perform the pre-installation instructions described on page 37.
2
Remove the side panel.
(1) Remove the two screws located on the rear edge of the
side panel.
(2) Press the side panel release button.
(3) Slide the side panel toward the rear of the chassis to
disengage it.
Summary of Contents for Altos G540 Series
