![background image](http://html.mh-extra.com/html/acer/altos-g540-series/altos-g540-series_user-manual_5825041.webp)
31
Configuring the system OS
The Altos G540 comes with Acer EasyBUILD
that allows users to
conveniently install the preferred operating system. To start using
EasyBUILD, follow the steps below.
1
Locate the EasyBUILD DVD included in the system package.
2
With the system turned on, press the DVD-ROM drive Eject button.
3
When the disc tray slides open, insert the EasyBUILD DVD with the
label side of the disc facing upward.
Note:
When handling the disc, hold it by the edges to avoid
smudges or fingerprints.
4
Gently press the disc down to make sure that it is properly
inserted.
Caution:
While pressing the disc, be careful not to bend the disc
tray. Make sure that the disc is properly inserted before closing
the disc tray. Improper insertion may damage both the disc and
the DVD-ROM drive.
5
Press the drive Eject button again to close the disc tray.
6
The Acer EasyBUILD sequence begins. Follow all onscreen
instructions.
For more information, refer to the EasyBUILD Installation guide.
Note:
EasyBUILD only supports the Microsoft and Red Hat Linux
operating systems. The Windows or Red Hat installation disc(s) is
required to install the OS.
Summary of Contents for Altos G540 Series
