Appendix A: Server management tools
116
LSI 1068 SAS Configuration Utility
This section explains how to create a RAID 1 volume when the LSI 1068
SAS controller board is installed.
To initialize the LSI Logic Config Utility:
1
Turn on the server and the monitor.
If the server is already turned on, close all open applications, then
restart the server.
2
During POST, press
Ctrl
-
C
on the SAS BIOS prompt.
To load the factory default RAID setting:
1
On the LSI Logic Config Utility, press
Alt
-
N
to display Global
Properties.
2
Select
Restore Defaults
, then press
Enter
.
3
Press
Esc
, then select
Save changes then exit this menu
.
4
Select
SAS1068
, then press
Enter
.
5
Select
Advanced Adapter Properties
, then press
Enter
.
6
Select
Restore Defaults
, then press
Enter
.
7
Press
Esc
twice, then select
Save changes then exit this menu
.
To create a RAID 1 volume with a hot spare disk:
1
On the LSI Logic Config Utility, click
SAS1068
, then press
Enter
.
2
Select
RAID Properties
, then press
Enter
.
3
Select
Create IM Volume
, then press
Enter
.
4
Move the cursor to the RAID Disk column.
5
Press the space bar to change the setting from No to
Yes
.
The Drive Status will be marked as Primary.
6
Move the cursor to another disk.
7
Press the space bar to change the setting from No to
Yes
.
The Drive Status will be marked as Secondary.
Summary of Contents for Altos G540 Series
