OPERATION
Example
A system has six different sources as shown in Figure 3-7. Source ''A'' is a video camera.
Source ''B'' is a VCR. Sources ''C'' through ''F'' are various computers. All sources are
connected to a 3rd party (non-Accurate Imaging) signal switcher. The switcher is
connected to projector slot 1. For each source, a Recall memory is created to store its
display settings. No two sources have the same frequencies.
UTIL 1 then 4
is pressed to turn on the ASR feature for the projector's slot 1 input.
When ASR is on and a source is selected by the switcher, the projector automatically
adjusts its display settings for the new source by switching to the Recall memory set up
for that source.
For additional information, see ''About the Accurate Sync Routing System'' in Section
3.5, subsection Decoder Options.
UTIL 1 then 5
Clear Current Setup
This utility is used to clear the current setup memory to the factory default display
settings.
To clear the current setup memory, press
5
from the Source Setup menu. A
dialog box is displayed. Move the cursor to ''Do it'' then press
ENTER
to clear the
memory. If you press
ENTER
with the edit cursor on ''Cancel'' the clear
3-35
Summary of Contents for Model 9
