Accurate Technology Model 9, Installation Manual

Page: 20 / 132

INSTALLATION & SETUP
2.5 Power Connection
To apply power to the projector, plug the AC line cord into the line input socket located
at the front panel of the projector. Plug the three-prong end of the line cord in a grounded
AC outlet. Input voltage to the projector must be between 90 and 264 VAC,
50 or 60 Hz.
The power source must supply 650 watts of power to the projector.
2.6 Source Connections
The projector includes a built-in RGB input interface for connection of external RGB
sources and audio equipment. This input interface is shown in Figure 2-16. The built-in
interface is not removable.
Optional interface modules are available to accommodate other signal types. These
include a Composite/a-video Module, an HDTV
Input Module, and a PC Analog Input
Module. Any one of these can be installed in slot 2. A Multi-standard Decoder may be
installed to add four additional inputs to the system (''slots'' 3 to 6). To further increase
the number of inputs, a signal switcher may be connected to the RGB
interface in slot 1
to add 8 more sources to the system (9 switcher inputs replace one RGB input). Other
switchers may be connected to the first switcher for more inputs. Brief descriptions of the
above mentioned optional modules are given in Appendix H,
Interfaces. For additional
details, contact your dealer and Accurate Imaging.
2-14