Accumet XL 20, User Manual, Page: 74 / 199

63
DO Setup:
DO Setup Screen
XL40 and 60 meters
The XL40 and XL60 meter allows you to measure DO, BOD, OUR and SOUR. Each mode is
independent from one another and needs to be setup separately. However the basic setup
procedure is virtually identical for each mode with exceptions noted. This manual will focus on DO
Setup screens, but each mode will setup in the same manner. BOD, OUR and SOUR have a
configuration to edit in the setup mode, see BOD, OUR and SOUR Setup.
The DO Setup screen present many options to control the operating parameters of the meter.
The meter is factory set with regard to these options, and is ready for use under most
circumstances (see
‘ Appendix: XL Series Meters Factory Default Settings’ section for default
settings). The operating parameters of the DO mode can be set and controlled from the DO setup
screen. The DO Setup section will guide you through the various options available in the DO
setup mode.
Function Buttons on DO Setup Screen
Touch OK to confirm DO Setup and return to the DO Measure screen.
Touch Cancel to exit and return to the DO Measure screen without confirming DO Setup.
Touch View to view all DO data points stored in memory. See ‘DO Setup: View Stored Data’
section for details.
When you touch the Help button, information about the current screen appears. This information
includes step-by-step instructions for operating the meter from the current screen and possible
applications information for that screen.
Touch Reset to reset all DO Setup Criteria to the factory default.
Example: - XL60 DO Setup screen