Accumet XL 20, User Manual, Page: 171 / 199

160
Warranty / Compliance
Meter, Electrode and Probe Warranty Statement
The Fisher Scientific Company (“Fisher”) warrants to the direct purchaser that the accumet meters and
Accumet, AccuTupH, AccuFET, AccupHast, and Microprobe electrodes will be free from defects in material
or workmanship for a specified warranty period. During that period, Fisher will repair or replace the product
or provide credit, at its sole option, upon prompt notification and compliance with its instructions. Warranties
listed below are from delivery date.
Unless otherwise agreed, the warranty is limited to the country in which the product is sold.
No Fisher employee, agent or representative has the authority to bind Fisher to any oral
representation or warranty concerning any product sold. Any oral representation or warranty
made prior to purchase of any product and not set forth in writing and signed by a duly authorized
officer of Fisher shall not be enforceable by the purchaser.
FISHER EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
Fisher’s sole responsibility and the purchaser’s exclusive remedy for any claim arising out of the
purchase of any product listed above is repair, replacement or credit as described above, where
applicable. In no event: 1) shall the cost of the exclusive remedy exceed the purchase price: 2)
shall Fisher be liable for any special, indirect, incidental, consequential, or exemplary damages,
howsoever arising, even if Fisher has been advised of the possibility of such damages.
Each article that Fisher furnishes will conform to the written specifications given in this manual, or
those of a further improved model. Changes are made often to the information in the manual and
will be incorporated into future editions.
Notice of Compliance
WARNING: This meter generates, uses, and can radiate radio frequency energy. If not installed
and used properly, that is in strict accordance with the manufacturer’s instructions, it may cause
interference to radio communications. It has been tested and found to comply with the limits for a
Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to
provide reasonable protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area may cause interference, in which
case the user, at his own expense, will be required to take whatever measures may be required
to correct the interference.
This product is to be used only as described in the manual. This product is for indoor use only,
and must be used in a well ventilated area.
WARNING: To meet or exceed FCC regulations and comply with CE requirements, the
Fisher-supplied power supply must be used. Use of a power supply that is not approved
by Fisher Scientific may cause safety hazards and/or cause unit to exceed EMC limits
and/or damage unit. When using this meter with a computer or printer, a shielded RS232
cable must be used to meet or exceed FCC regulations, and comply with CE Mark
requirements.
WARRANTY FOR METER
For Display: 12 months
For All Other Meter Components: 36 months
WARRANTY FOR ELECTRODES & PROBES
For electrode models 13-620-532 to 13-620-539: 6 months
For other electrode models: 12 months