37
pH Setup:
Set Data Storage Criteria
XL15, 20, 25, 50 and 60 meters
This screen allows you to select which criteria are stored in the data logger with the measurement
when you store the data. The status of the current data storage criteria is displayed on the
screen. The criteria option is active if ON appears to the right of the option. It is inactive if OFF
appears to the right of the option. Any active criteria will be stored on demand.
To set Data Storage Criteria
1. Touch the
Touch here to edit
button next to the Data Storage Criteria to access the pH
Data Storage Setup screen.
2. Touch
ON
or
OFF
to change the status of a criteria you want to modify.
3. Repeat step 1 for all the remaining criteria except Data logging Interval (
or
Data storage
Interval
).
4. For Data logging Interval (
or Data storage Interval
), touch
MANUAL
to log pH data only
when the
Log Data
button is pushed, touch
STABLE
to automatically log pH data when
the pH reading is stable, or touch
TIMED
to set a specific timed interval in seconds to log
pH data.
5. Touch the
OK
button to accept the changes of the entire group of data storage criteria and
return to the pH (pH FET) Setup screen.
Summary of Contents for XL 20
