Accumet XL 20, User Manual, Page: 115 / 199

104
TDS Setup
XL20, 30, 50 and 60 meters
To Set Data Storage Criteria
This screen allows you to select which criteria are stored in the data logger with the measurement
when you store the data .The status of the current data storage criteria is displayed on the
screen. The criteria option is active if
ON appears to the right of the option. It is inactive if OFF
appears to the right of the option. Any active criteria will be stored on demand.
The TDS Data Storage Criteria is set the same way as previously described in Conductivity
Setup. See
‘ Conductivity Setup: Data Storage Criteria’ section for instructions.
To Set Display Criteria
This screen allows you to choose what information you would like to be displayed on the TDS
Measure screen, particularly the information contained in the data box at the bottom of the
Measurement screen. The status of the current display criteria is displayed on the screen. The
criteria option is active if
ON appears to the right of the option. It is inactive if OFF appears to the
right of the option.
The TDS Display Criteria is set the same way as previously described in Conductivity Setup. See
‘ Conductivity Setup: Set Display Criteria’ section for instructions.
To View Stored Data
The XL20, XL30, XL50 and XL60 have a memory capacity to store up to 1000 data points. The
View Stored Data screen allows you to sort and look at specific data points stored in the meter
based on the meters memory capacity. The stored data can be sorted by any of the parameters
available in the screen header.
The meter stores TDS data under the following parameters:
Reading Temperature Coefficient
Date / Time / Channel Cell Type
Sample Id Last Standardizations
Temperature Meter Model / Serial No
Reference Temperature Operator
Viewing Stored TDS Data is done the same way as previously described in Conductivity Setup.
See
‘ Conductivity Setup: View Stored Data’ section for instructions.