Accumet XL 20, User Manual, Page: 25 / 199

14
Getting Started:
Dissolved Oxygen Probe
XL40 and 60 meters
The XL series meter – XL40 ands XL 60 - allows you to use the Fisher Scientific accumet BOD
Probe with DIN connector. See ‘
Replacement Parts’ section for adapters to allow use of YSI
Dissolved Oxygen probes with your accumet meter.
1. Carefully review the instruction sheet accompanying the probe for setup
and conditioning information.
2. Connect the probe to the DO DIN jack on the back of
the meter. Allow the probe to warm up for 30 minutes.
3. Store the DO probe in a BOD bottle filled with 1 inch of water.