43
mV Setup:
Set Sample ID#
XL15, 20, 25, 50 and 60 meters
A sample ID is required if you wish to log data or activate a timed printing. Whenever this option
is active, each time you touch Log Data on the mV Measure screen, the mV value along with
date/time/channel and the sample ID will be sent to data storage.
You can manually enter an alphanumeric identification number of 10 characters for any sample or
you can have the meter sequentially number your samples beginning at the number of your
choice. You can also choose to deactivate the sample ID.
To set sample ID — Manual:
1. Touch
Manual
for manual Sample ID entry.
2. The current ID is displayed on the screen.
3. Use the alphanumeric keypad on the screen to enter the desired Sample ID. The
BS
key
will allow you to backspace to remove a character that was incorrectly entered.
4. Touch
Enter
to accept current Sample ID and return to the mV Setup screen.
To set sample ID — Sequential
1. Touch
Sequence
for sequential Sample ID entry
2. The current ID is displayed on the screen
3. Use the numeric keypad on the screen to enter the desired Sample ID number that you
would like your sequential Sample ID assignment to begin with. Every time you touch
or
Log Data
on the pH Measure screen, the Sample ID will increase by 1. The
BS
key will
allow you to backspace to remove a character that was incorrectly entered.
4. Touch
Enter
to accept the first sequential Sample ID and return to the mV Setup screen.
To deactivate the sample ID assignment — None
1. Touch None to deactivate the sample ID assignment
Summary of Contents for XL 20
