ABEM Terrameter LS
59
Figure 66. The Electrode Positions view in VES mode. Highlight on the second row
and active electrode position marker on the fourth row
The
Electrode Positions View
(Figure 66) lists all the electrode positions from the
protocol file. The dark yellow arrow is placed on the line that corresponds to the
active electrode position. This electrode position is the one that is shown on the
second row of the
Progress View
(Figure 65). The
Electrode Positions View
will be
empty when the instrument is not in VES mode.
•
Changing the active electrode position from the
Electrode Positions View
―
Highlight the wanted electrode position in the list
―
Press <Ok>
A new electrode position can be created for use during the measurement session.
Note!
Please observe that electrode positions created this way
are not saved to disk, and thus will be lost when the
instrument is turned off or when the active
Project
or
Task
is changed
Summary of Contents for Terrameter LS
Page 2: ...ABEM Terrameter LS ...
Page 10: ...ABEM Terrameter LS v ...
