ABEM Terrameter LS
72
8
Terrameter LS Utility Software
The Terrameter LS Utility Software is a tool that can be used for various functions.
These include:
•
Handling spreads and protocols: including copying between PC and instrument
and converting from older ADR
4
- and ORG
5
-formats
•
Transferring measured data from the instrument to a PC, including possibly
captured full waveform data
•
Exporting
Task
data to USF (Universal Sounding Format), DAT and TXT-formats
•
Viewing data of a
Task
in a table with possibility to export selected data to TXT-
format
•
Viewing full waveform data
•
Updating the instrument software
8.1
Instrument Network Address
In order for the utility software to communicate with the instrument there must be a
network connection. Connect the Terrameter LS to the same network as the computer.
Check the network address of the Terrameter LS on the
“Instrument/Network”
View
(the numbers that follow after “eth0:” is the network address), and enter it as
“Terrameter LS Network Address”. As a convenience the Utility Software will
remember the latest used network addresses. These can be accessed from a drop-down
list.
When using the utility software to communicate with the instrument there are a couple
of error situations that can occur:
-
The given “Terrameter LS Network Address” is not a valid IP-address which
results in an error message similar to this being displayed
Figure 83. Error message for an invalid IP-address
4
Used by older versions of ABEM Lund Imaging System consisting of Terrameter SAS300C /
SAS1000 / SAS4000 and Electrode Selector ES464 / ES10-64[e][C].
5
Used by older versions of ABEM Lund Imaging System consisting of Terrameter SAS300C /
SAS1000 / SAS4000 and Electrode Selector ES464 / ES10-64[e][C].
Summary of Contents for Terrameter LS
Page 2: ...ABEM Terrameter LS ...
Page 10: ...ABEM Terrameter LS v ...
