ABEM Terrameter LS
54
Or
―
Press <Play-Stop>
It might take a few seconds, before the measuring pause dialog is shown (Figure
59). Here it is possible to resume or stop the data acquisition process.
―
Move the highlight to the appropriate row
―
Press <Ok>
Figure 59. Measuring pause dialog
6.9.5 Deleting, Undeleting and Re-measuring Data
If a problem with the data acquisition is detected, the data acquisition process can be
stopped and data deleted so that these data points can be re-measured.
•
Deleting data
―
Stop an ongoing measurement (6.9.4 Pausing / Stopping the Data Acquisition)
―
Highlight the row in the progress list that represents the point from which data
should be re-measured
―
Press <Options>
―
Highlight “<Delete measurements after Mxxxx>” (Mxxxx represents a
measurement id) (Figure 60)
―
Press <Ok>
Figure 60. Delete data points Option menu
This action will delete the given data points and create a new entry in the progress list,
“Deleted ‘Measurement Mxxx,…,Mxxx n=xxx’” (Figure 61). The Mxxx part shows a
span of measurement ids that are deleted and the n value is the number of data points
deleted.
Summary of Contents for Terrameter LS
Page 2: ...ABEM Terrameter LS ...
Page 10: ...ABEM Terrameter LS v ...
