ABEM Terrameter LS
58
6.10.1 Managing Electrode Positions
Electrode positions for a VES
Task
are handled as “MN/2 and AB/2” numbers. These
numbers will be multiplied with the minimum electrode spacing selected. The
electrode position to be measured, the active position, can be changed. It is in this way
possible to step through all the electrode positions that are pre-defined in the protocol
file.
Figure 65. The Progress view in VES mode
In VES mode a line with a “MN/2 and AB/2” electrode position will be shown on the
Progress View
(Figure 65). This is the active electrode position.
•
Changing the active electrode position from the
Progress View
―
Highlight the “MN/= x AB/= x” row in the progress list
―
Press <Left> and/or <Right>
Possible new electrode positions added in the
Electrode Positions View
(see below)
can also be set to the active electrode position in this way.
Summary of Contents for Terrameter LS
Page 2: ...ABEM Terrameter LS ...
Page 10: ...ABEM Terrameter LS v ...
