ABEM Terrameter LS
67
7
Measurement Post-Production
7.1
Repack the LS system
Cleaning and repacking the equipment properly will give your instrument a longer life.
Below we have tried to specify key areas for maintenance of this instrument.
•
Check that all pieces of equipment is collected from the field
•
Clean each part thoroughly, if needed by washing and drying
•
Always store the instrument dry in its original travelling package
7.2
Export Measurement Data
To enable analysis and processing of the collected measurement data it can be
exported. There are two ways to do this, either by exporting directly to a USB
memory stick connected to the LS, which is described in the following subchapters, or
by using the Utility Software (see chapter 8 Terrameter LS Utility Software).
Note!
It is strongly recommended for users to always transfer
the
Project
database and store it for future use. It may
turn out that more information than the standard export
formats provide becomes desirable. Also, in case of
need of support from ABEM’s support department you
are likely to be asked to send the
Project
database file as
it contains essential information for instrument
diagnostics.
7.2.1 Export a Task as a DAT File
Data can be exported as a DAT-file (Res2dinv compatible format) to a PC via a USB
memory stick, for analysis, processing and presentation. Connect the USB device to
the Terrameter LS.
•
Export as a DAT file
―
Navigate to the “
Projects/Task List”
View
―
Highlight the
Task
to export
―
Press <Options>
―
Highlight <Export
Task
as DAT> (Figure 73)
―
Press <Ok>
Summary of Contents for Terrameter LS
Page 2: ...ABEM Terrameter LS ...
Page 10: ...ABEM Terrameter LS v ...
