KNX control elements and application parameters
Application "Door communication"
Product manual 2CKA001473B5343
│
204
Options: 1
2
3
4
5
The parameter is used to specify how many control elements are used.
Type of the control element x
:
Options: Switch
Roller
blind
Forced
operation
1-byte value [0-100%]
1-byte value [0-255]
8-bit
scene
The parameter is used to specify the type of control element used.
–
Switch
: Switching commands are sent with 1 bit (0 or 1), e.g. for switching a switching
actuator. The following supplementary parameter is available:
Value for object x
:
Options: OFF
ON
–
Roller blind
: Allocation of a blind actuator. The following supplementary parameter is
available:
Value for object x
:
Options: "Up/Open"
"Down/Close"
–
Forced operation
: Management systems can access the device directly via KNX. It can
additionally be specified that selection can be carried out manually via buttons (forced
operation). The following supplementary parameter is available:
Value for object x
:
Options:
ON, forced operation active
OFF, forced operation active
Deactivate forced operation
–
1-byte value [0 - 100%]
: A value is sent as 1-byte percentage value. The following
supplementary parameter is available:
Value for object x
:
Options:
Setting option from 0 - 100
–
1-byte value [0 - 255]
: A value is sent as 1-byte value without a sign, e.g. actuating value,
angle or brightness value. The following supplementary parameter is available:
Value for object x
:
Options:
Setting option from 0 - 255
