ABB SmartTouch B/stainless Product Manual Download

Page: 69 / 368

Commissioning of the KNX function via ABB DCA SmartTouch 10 (from

ETS5)

Product manual 2CKA001473B5343

│

9.1.3 Installation

sequence

Notice

The following description of the installation sequence is made on the basis of
version ETS5.

The ETS app (etsapp file, ABB DCA SmartTouch 10) for the ABB SmartTouch

is installed via

the ETS.

The app can be downloaded either via https://new.abb.com/en or via the My KNX access.

Fig. 38: App installation (example illustration)

1.  Open the ETS5.
2.  Click the green plus sign.
3.  Select the etsapp file.

– The app is added to the ETS.

Notice

The displayed apps, the designation and the versions, are only exemplary and
serve only for illustration.

Summary of Contents for SmartTouch B/stainless

















































































































































































































































































































































































Search results

Summary of Contents for SmartTouch B/stainless

Reviews:

Related manuals for SmartTouch B/stainless

Brands by name

Popular brands

ABB SmartTouch B/stainless, Product Manual

Search results

Summary of Contents for SmartTouch B/stainless

Reviews:

Related manuals for SmartTouch B/stainless

Brands by name

Popular brands