Communication
66
Serial Number
This attribute is a number used in conjunction with the Vendor ID
to form a unique identifier for each device.
Product Name
This text string should represent a short description of the
product/product family represented by the product code in
attribute 3.
Reset Service
The Identity object provides a reset service. There are two
different types of reset requests:
• Type 0: ‘Power Cycling Reset’. This service emulates a power
cycling of the module.
• Type 1: ‘Out of box reset’. This service sets a “out-of-box”
configuration for the drive and performs a reset for the module.
4,5,6,7
Extended device status information
0000 = Unknown
0010 = Faulted I/O connection
0011 = No I/O connection established
0100 = Non-volatile configuration bad
0110 = Connection in Run mode
0111 = Connection in Idle mode
8
Minor Recov-
erable Fault
TRUE indicates the device detected a recoverable
problem. The problem does not cause the device to
go into a faulted state.
9
Minor Unre-
coverable
Fault
TRUE indicates the device detected a unrecovera-
ble problem. The problem does not cause the
device to go into a faulted state.
10
Major Recov-
erable Fault
TRUE indicates the device detected a problem,
which caused the device to go into the “Major
Recoverable Fault” state.
11 Major
Unre-
coverable
Fault
TRUE indicates the device detected a problem,
which caused the device to go into the “Major Unre-
coverable Fault” state.
12,13,14,15
Reserved, set to 0.
Summary of Contents for RETA-01
