background image

 

1

 

 
 

 

 
 
 
 
 

1.  If you purchased this VoIP Telephone Adapter to share your high-speed 

Internet connection with other computers, you must have an established 
Internet account from an Internet Service Provider (ISP).  

2.  It’s best to use the same computer that is connected to your router for 

configuring the DVG-2101S VoIP Telephone Adapter. The DVG-2101S acts 
as a DHCP Client and will be assigned all the necessary IP address 
information from your network. See the Quick Installation Guide or the Manual 
on the CD-ROM for setting each network adapter to automatically obtain an 
IP address. 

Check Your Package Contents 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

If any of the above items are missing, please contact your reseller. 

 

©2007 D-Link Corporation, Inc. All rights reserved. Trademarks or registered trademarks are the property of their 
respective holders. Software and specifications subject to change without notice. 

DVG-2101S

VoIP Telephone Adapter

Before You Begin 

This product can be set up 

using any current web browser, 

i.e., Internet Explorer 6 or 

Netscape Navigator 6.2.3.

 

 

D-Link DVG-2101S VoIP Telephone Adapter
 
 
CD-ROM (containing Manual and Q.I.G.) 
 
 
Ethernet Cable 
 
 

 

Phone Cable 
 
 
12V, 1.5A Power Adapter 

 
 

Quick Installation Guide

 

Using a power supply 

with a different voltage rating 
will damage and void the 
warranty for this product.

 

Summary of Contents for DVG-2101S















Reviews: