ABB IRBP, Product Manual

Page: 162 / 334

4.6 Operator panel IRBP
General
This chapter describes the I/O configurations for operator panels delivered by ABB.
I/O board configuration
Ana-
log/Output Analog/In-
put Digital/Out-
put Digital/In-
put Type Name Address
Simulated digit-
al I/O B_OP_SIM -
- - 7 12 Digital I/O B_OP_21 21
- - 7 12 Digital I/O B_OP_22 22
System functions
Inputs
Action Signal name
Start diPROG_START
Stop diPROG_STOP
Outputs
Status Signal name
CycleOn doCYCLE
MotorOn doMON
AutoOn doAUTO
I/O signals configuration for B_OP_SIM
Digital outputs
Description Name UnitMap
CycleOn doCYCLE 10
MotorOn doAUTO 11
AutoOn doMON 12
I/O signals configuration for B_OP_21, B_op_22
Digital outputs
Description Name UnitMap Output
Operator ready activated on work area 1 doPROC1 0 1
Operator ready activated on work area 2 doPROC2 1 2
Permit operator ready on work area 1 doPERM_ENTR1 2 3
Permit operator ready on work area 2 doPERM_ENTR2 3 4
Continues on next page
162 Product manual - IRBP /D2009
3HAC037731-001 Revision: T
© Copyright 2010-2020 ABB. All rights reserved.
4 Configuration
4.6 Operator panel IRBP