ABB FBIP-21 BACnet/IP, User Manual

Page: 42 / 74

Present
value ac-
cess type Unit Minimum/ Maxim-
um present value
(information, de-
pends on the drive
parameter) Description Default object name Object
ID
R No
unit - Active fault Active-Fault AV18
R No
unit - Previous fault- 1 Previous-Fault-1 AV19
R No
unit - Previous fault- 2 Previous-Fault-2 AV20
R % 0, 100 Output level of Analog Output
1 AO1-Monitor AV21
R % 0, 100 Output level of Analog Output
2 AO2-Monitor AV22
W s 0, 1800 For frequency reference chain Accel-1-Seconds AV23
W s 0, 1800 For frequency reference chain Decel-1-Seconds AV24
W No
unit - Parameter number to be used
by mailbox function. Mbox-Param AV25
W No
unit - Set (W) or indicate (R) of the
data value of mailbox function Mbox-Data AV26
W Hz -500, 500 Minimum speed Min-Speed AV29
W Hz -500, 500 Maximum speed Max-Speed AV30
R % -200, 200 Actual motor speed Output-Speed AV31
R % 0, 200 Actual motor current Output-Current-
Range AV32
W A 0, nominal current Max motor current Max-Current AV33
R V 0, 200 DC bus ripple voltage DC-Ripple AV34
R % 0, 100 Loop controller feedback LOOP-Feedback-
Monitor AV40
R % 0, 100 Loop setpoint monitor LOOP-Setpoint-Monit-
or AV41
C % 0, 100 Loop setpoint LOOP-Setpoint AV42
W % 0, 100 Loop feedback LOOP-Feedback AV43
R % 0, 100 Loop output LOOP-Output AV44
W No
unit 0.1, 100 Loop gain LOOP-Gain AV45
W s 0, 3600 Loop integration time LOOP-Integration-
Time AV46
% 0, 100 Loop controller deviation LOOP-Deviation-
Monitor AV49
W No
unit 0.1, 100 Loop-1 gain LOOP-1-Gain AV53
42 Communication protocol