ABB FBIP-21 BACnet/IP, User Manual

Page: 40 / 74

BACnet interoperability building blocks
The following BACnet interoperability building blocks that is collection of one or more
services, are supported by FBIP-21:
Description Building block
(short name)
Data Sharing – Change of Value DS-COV-B
Data Sharing – Read Property – B (Provider / Server) DS-RP-B
Data Sharing – Read Property Multiple – B (Provider / Server) DS-RPM-B
Data Sharing – Write Property – B (Provider / Server) DS-WP-B
Data Sharing – Write Property Multiple – B (Provider / Server) DS-WPM-B
Device Management – Dynamic Device Binding – B (Provider / Server) DM-DDB-B
Device Management – Dynamic Object Binding – B (Provider / Server) DM-DOB-B
Device Management – Device Communication Control – B (Provider / Server), password
is not required DM-DCC-B
Device Management – Reinitialize Device B (Provider / Server), password is not required DM-RD-B
Device Management – Time Synchronization DM-TS-B
BACnet object list
The adapter module supports the BACnet objects listed below. The present value
property of the object can be readable (R), writable (W) or commandable (C), i.e.
writable with priority.
During the first boot, the FBIP-21 will build a BACnet object list based on the available
functionalities in the connected drive. Note that the objects listed below are not
available for all drives.
￭
Analog input object
Present
value ac-
cess type Unit Minim-
um/Maxim-
um preset
value Description Default object
name Object
ID
R % 0,100 Indicates the input level of analog input
1. AI1-Monitor AI0
R % 0,100 Indicates the input level of analog input
2. AI2-Monitor AI1
￭
Analog output object
Present
value ac-
cess type Unit Minimum/
Maximum
preset
value Description Default object
name Object
ID
C % 0,100 Controls analog output 1 (drive must be
configured for BACnet control). AO1-command AO0
40 Communication protocol