ABB FBIP-21 BACnet/IP, User Manual

Page: 41 / 74

Present
value ac-
cess type Unit Minimum/
Maximum
preset
value Description Default object
name Object
ID
C % 0,100 Controls analog output 2 (drive must be
configured for BACnet control). AO2-command AO1
￭
Analog value object
Present
value ac-
cess type Unit Minimum/ Maxim-
um present value
(information, de-
pends on the drive
parameter) Description Default object name Object
ID
R rpm 0, nominal speed Motor speed Output-RPM AV0
R Hz -500, 500 Output frequency Output-Freq AV1
R V 0, 2000 DC bus voltage DC-Voltage AV2
R V 0, 2000 AC output voltage Output-Voltage AV3
R A 0, nominal current Output current of drive Output-Current AV4
R % -1600, 1600 Output torque of motor as a
percentage of nominal torque Output-Torque AV5
R kW nominal power (+/-) Output power in kW Output-Power AV6
R % -40, 160 Heatsink temperature Operating-Temp-
Range AV7
R kWh 0, 1000 Cumulative energy usage of
the drive. This value can be
reset. Kilowatt-Hour-Meter-
R AV8
R kWh 0, 999999 Cumulative energy usage of
the drive. This value cannot be
reset. Kilowatt-Hour-Meter-
NR AV9
R % -100, 100 This object is the Process PID
feedback signal. Process-PID-Feed-
back AV10
R % -100, 100 This object is the Process PID
output signal’s deviation from
its setpoint. Process-PID-Devi-
ation AV11
R % -100, 100 External PID feedback percent-
age scaled External-PID-Feed-
back AV12
R % -100, 100 This object is the External PID
output signal’s deviation from
its setpoint. External-PID-Devi-
ation AV13
R hours 0, 3.40282347e38 Drive’s resettable run time
(reset by writing 0). Running-Hours AV14
R °C -10, 200 Motor temperature Motor-Temp-De-
grees-C AV15
C % -150, 150 Speed setpoint 1 Input- Reference-1 AV16
C % -150, 150 Speed setpoint 2 Input- Reference-2 AV17
Communication protocol 41