ABB FBIP-21 BACnet/IP, User Manual

Page: 27 / 74

Default Description Name/Value No.
Disable services that are not required. Each service is represented
by a single bit. Bit 0, Lock configuration, can be used to prevent acci-
dental changing of this parameter. By default, all services are enabled
and configuration is unlocked. Service configur-
ation 22
Information Name Bit
Changing this bit to one will lock service
configuration and no bit can be changed.
Only resetting the fieldbus configuration
will unlock the parameter. To reset the
fieldbus configuration, choose "Reset all
fieldbus settings" or "Clear all" in parameter
96.06 Parameter restore. Lock configura-
tion 0
When this bit is set, access from ABB IP
Configuration tool is prevented. Disable IP con-
fig tool 1
When this bit is set, access from Ethernet
tool network (eg, ABB Drive Composer tool)
is prevented. Disable ETH
tool network 2
When this bit is set, response to ICMP (ping)
message is prevented. Disable ping re-
sponse 3
When this bit is set, access from Ethernet
tool network is unsecured.
Note: Drive Composer pro before V2.7 sup-
ports unsecured communication only.
Unsecured ETH
tool network 4
When this bit is set, access to web pages
is disabled. Disable config-
uring web
pages 5
Reserved 23
...
26
0 = Done Validates any changed adapter module configuration parameter
settings. After refreshing, the value reverts automatically to Done. FBA Par refresh 27
This parameter cannot be changed while the drive is running.
Refreshing done 0 = Done
Refreshing 1 = Configure
0 hex Displays the parameter table revision of the fieldbus adapter module
mapping file stored in the memory of the drive. FBA Par table
ver 28
In format xyz, where
x = major revision number
y = minor revision number
z = correction number
This parameter is read-only.
Parameter table revision 0..0xFFFF
0 Displays the drive type code of the fieldbus adapter module mapping
file stored in the memory of the drive. FBA Drive type
code 29
This parameter is read-only.
Start-up 27
12